COMMERCIAL

INDUSTRIAL

TRANSPORTATION

LEGACY

LEGACY

LC3X   The LC3X automatically switches three dry contacts in response to changes in natural daylight, utilizing independent setpoints. The LC3X controller requires a separate PC or PD style sensor to complete the low voltage system. The LC3X can be configured as a standalone controller, or for cascaded operation, with a master LC3X providing the sensor signals to slave controllers.
3 LEVEL                                  Lighting Controller	General Information Brochure Application Guide Data sheet Specification Design Tools

---

LC9   The LC9 photocell lighting control system automatically switches indoor or outdoor electrically switches indoor or outdoor electrical lighting in response to changes in natural daylight. The low voltage system consists of a Control Module in a plastic case, a photoconductive sensor and a Power Cube switcher unit.
LC9 is being discontinued.                              Replacement are still                              available.                                Downloadable installation                              manual and user guides are                              available.	General Information Brochure Application Guide Data sheet Specification Design Tools

LC9PF   The LC9PF indoor photocell lighting control system automatically signals a power output devices such as a motion sensor, energy management system dedicated PLC-MULTIPOINT switchpack to switch indoor electrical lighting in response to changes in natural daylight.   The low voltage system consists of a Control Module on a plastic cover and an onboard indoor photoconductive sensor. Power output controls are provided by a motion sensor switchpack, an energy management system or a dedicated PLC-MULTIPOINT switchpack.

Best used for existing                              facilities for replacement, not                              recommended for new                              construction.                                Downloadable installation                              manual and user guides are                              available.

General Information Brochure Application Guide Data sheet Specification Design Tools

---

LCM-AH   The standard LCM-AH comes with an atrium type photodiode sensor and has three outdoor control channels capable of switching or coordinating groups of interior hanger fixtures. Time schedules can be added for different days of the week.
The LCM-AH is being                                  replaced by LCM-IE.                                    Downloadable installation                                  manual and user guides are                                  still available.	General Information Brochure Application Guide Data sheet Specification Design Tools

LCM-PK   The standard LCM-PK has three outdoor control channels capable of switching rows of parking deck luminaries when natural light is sufficient to maintain safe operational lighting levels. Each of these channels can be programmed for perimeter daylighting, top deck night lighting, core time-clock control and is operated by a single photodiode outdoor sensor, located on either side of the parking structure.

The LCM-PK is being                                  replaced by LCM-IE.                                    Downloadable installation                                  manual and user guides are                                  still available.

General Information Brochure Application Guide Data sheet Specification Design Tools

LCM-PL   The standard LCM-PL operates four zones of parking lot lights under user selectable photo and time-clock combinations. The LCM-PL comes with an weather proof outdoor sensor and also a choice of NEMA1 or NEMA3R enclosure with internal HAND/OFF/AUTO selector switches.
The LCM-PL is being                                  replaced by LCM-IE.                                    Downloadable installation                                  manual and user guides are                                  still available.	General Information Brochure Application Guide Data sheet Specification Design Tools

LCM-RO   The standard LCM-RO comes with an outdoor CES sensor and has three outdoor control channels capable of switching groups of exterior sign and advertising lighting separately from site safety and security lighting. An indoor channel is available for full daylight harvesting.
The LCM-RO is being                                  replaced by LCM-IE.                                    Downloadable installation                                  manual and user guides are                                  still available.	General Information Brochure Application Guide Data sheet Specification Design Tools

LCM-WH   The standard LCM-WH comes with a skylight photodiode sensor and has one skylight control channel can be programmed for pattern switching of four levels or zones of fixtures. It also can be configured for Bi-level fixture control. Additional motion detector can save energy by switching the lights in an office to reduced level when the space in unoccupied.
The LCM-WH is being                                  replaced by LCM-IE.                                    Downloadable installation                                  manual and user guides are                                  still available.	General Information Brochure Application Guide Data sheet Specification Design Tools

HOME I WHAT'S NEW! I PRODUCTS I APPLICATION I SITEMAP I COMPANY I TOOLS

Copyright 2008, PLC-Multipoint Inc., all rights reserved.